Pipe breaks and slab leaks · Flower Mound, TX
Burst Pipe Water Damage in Flower Mound, TX
When a pipe bursts, your plumber fixes the line and we fix everything the water touched. Our burst pipe water damage team in Flower Mound, TX extracts the water, opens only what must be opened, and dries walls, floors, and ceilings to standard.
- 24/7 live dispatcher
- Thermal imaging leak tracing
- Ceiling and wall drying
- Repairs after drying
Do this now
A pipe just burst. Here is the order of operations.
- Close the main valve. It is usually in the curb box near the street or where the line enters the house.
- Open a low faucet. This drains pressure from the lines so the leak slows faster.
- Shut off the water heater. Turn a gas unit to pilot, or switch off the breaker for an electric one.
- Cut power to wet rooms. Only if the panel is dry and you are not standing in water.
- Call a plumber and call us. The plumber repairs the pipe. We start extraction at (940) 274-9880.
If water is coming through a ceiling near a light fixture, stay out of that room and turn off its breaker. A sagging ceiling can drop without warning.
Local housing stock
Which pipes fail in Flower Mound homes
Most homes here were built from 1990 onward, so the plumbing tells a fairly consistent story.
| Build era | Share of homes | Common pipe | How it tends to fail |
|---|---|---|---|
| 1980s | About 15% | Copper, some polybutylene | Polybutylene fittings crack. Copper pinholes after decades of use. |
| 1990s | About 40% | Copper and CPVC | Slab leaks in copper under the foundation, brittle CPVC fittings |
| 2000s | About 19% | CPVC and PEX | Loose crimp fittings, split lines in cold exterior walls |
| 2010 and newer | About 21% | PEX | Fitting failures and freeze splits in attic or garage runs |
Shares rounded from American Community Survey data for Flower Mound. Remodeled homes may differ.
Freezes, slab leaks, and clay soil
The February 2021 winter storm showed how exposed North Texas plumbing is. The Town of Flower Mound did not have to issue a boil notice, but it did ask residents to cut water use while the region’s systems were strained. Inside homes, lines in exterior walls, attics, and garages froze and split, and many only leaked once they thawed.
Freezes are not the only threat. The clay soil under local slab foundations shrinks in drought and swells after rain. That movement can stress copper lines running under the slab. A slab leak often shows up as a warm spot on tile, a running water meter, or damp carpet with no obvious source.
Burst pipe water damage in Flower Mound TX often reaches farther than it looks. In a two-story house, a split line in an upstairs wall can soak the ceiling, insulation, and cabinets on the first floor before you see a drop.
What we do
Our burst pipe cleanup process
Trace the water
Thermal imaging and meters show every wet wall, ceiling, and floor, even behind cabinets.
Extract and open up
We pull standing water and make small, clean cuts only where cavities need airflow or material is ruined.
Dry and verify
Dehumidifiers, air movers, and cavity drying run until daily readings confirm a dry structure.
Rebuild
We patch drywall, match texture and paint, and replace flooring or cabinets that could not be saved.
Permits, costs, and insurance
Your plumber handles the pipe repair. If the house is left without water, Flower Mound Building Inspections offers emergency plumbing permits and same-day inspections when you call before 3:30 p.m. on a business day. That can get water back on faster.
Our cost depends on how far the water spread, how many floors it reached, and what has to be replaced. A standard homeowners policy usually covers sudden pipe bursts, including freeze breaks if the home was heated. Slow leaks and repairs to the pipe itself are often treated differently, so read your policy. We document everything and can work directly with your insurer. The insurance claim coverage estimator offers a quick first look.
Why call us for a pipe break
- Fast arrival. We aim to be on site in about 60 minutes in most of Flower Mound.
- Less demolition. Thermal imaging keeps cuts small and targeted.
- One team for repairs. Drying and rebuild handled together.
Tip for next winter: insulate pipes in the garage and attic, open cabinet doors on exterior walls, and let a faucet drip on the coldest nights.
Before the next freeze, read our guide to winter pipe burst risks.
Also in Flower Mound
Other ways we help in Flower Mound
Visit our main burst pipe water damage service page or the Flower Mound restoration overview. We also clean up pipe breaks in Lewisville, Argyle, and Carrollton.
FAQ
Burst pipe questions from Flower Mound
Do you repair the broken pipe?
No. A licensed plumber repairs the pipe. We handle the water damage: extraction, drying, and rebuilding walls, ceilings, and floors. We can start while the plumber works.
How can I tell if I have a slab leak?
Common signs are a warm spot on the floor, the sound of running water with everything off, a meter that keeps spinning, or damp flooring with no visible source. A plumber can confirm it with leak detection.
Why did my pipe leak days after the freeze ended?
Ice inside a pipe can crack it without leaking. Once the ice melts and pressure returns, water starts coming out of the crack. That is why many freeze leaks appear during the thaw.
Will you have to tear out a lot of drywall?
Usually not much. We use thermal imaging and meters to target wet areas and often dry wall cavities through small holes instead of large cuts.