IICRC S520 mold work · Argyle, TX
Mold Remediation in Argyle, TX
Mold remediation in Argyle, TX is about two things: removing the growth safely and fixing the moisture that fed it. We contain the area, clean with HEPA equipment, remove what cannot be saved, and dry the structure so mold does not have a reason to return.
- Containment and negative air
- HEPA air scrubbers
- Moisture source found
- Free estimates
Where we find mold in Argyle
- Attics: under water heaters and AC drain pans in newer homes
- Crawlspaces: older pier and beam houses near the town center
- Kitchens and baths: slow leaks under sinks and behind tile
- Outbuildings: barns, shops, and casitas that sit closed up
Most mold starts with a leak someone did not see.
Seeing or smelling mold? Do this first
Do not scrub, spray bleach, or run a fan on it. Disturbing mold sends spores into the air and into your HVAC system. Close the door to the room, keep kids and pets out, and turn off the air handler if the growth is near a return vent.
Then call (940) 274-9880. We inspect with moisture meters and thermal imaging to find the water source, measure how far the growth reaches, and give you a plan and a free estimate.
North Texas summers are hot and humid, and a closed-up house or attic can stay damp for weeks after a leak. That is why mold often shows up well after the water event that started it.
The process
How we remove mold from Argyle homes
Assess and find moisture
Moldy materials are mapped, and we trace the leak or humidity problem behind them.
Contain
Plastic barriers and negative air machines keep spores from spreading to clean rooms.
Remove and clean
Moldy drywall, insulation, and carpet come out. Framing and hard surfaces are HEPA vacuumed and cleaned.
Dry and verify
Dehumidifiers bring materials to dry standard, and we check the area before rebuilding.
Testing or remediation?
Mold inspection, testing, and remediation compared
People search for mold testing in Argyle when what they need is often an inspection and a plan.
| Step | What it answers | When it makes sense |
|---|---|---|
| Visual and moisture inspection | Where is the growth, and what is feeding it? | Almost always the first step |
| Air or surface sampling | What type of mold and how many spores are present? | Hidden growth suspected, health concerns, real estate deals |
| Remediation | How do we remove it safely and stop it coming back? | Visible growth or confirmed hidden growth |
| Post-remediation verification | Is the work area clean and dry? | Before walls are closed up |
Argyle housing
Why mold turns up in Argyle homes
About half of Argyle’s homes were built in 2000 or later, and many put the water heater and air handler in the attic. A slow drip from a drain pan can wet insulation for months before a ceiling stain appears. Attics also get extremely hot and humid in summer.
On the other end, the older homes from the 1960s and 1970s near the town center sometimes sit on pier and beam foundations. Crawlspaces with poor ventilation hold moisture and grow mold on joists and subfloor.
Barns, shops, and casitas on acreage lots often stay closed up and unconditioned. A roof leak there can go unnoticed long enough for mold to spread across stored items.
Mold remediation cost and insurance
Cost depends on the square footage affected, how much material must be removed, whether the growth is in an attic, crawlspace, or living space, and how much containment is needed. Try the mold growth risk calculator to see how quickly conditions in your home favor mold.
Insurance coverage for mold varies a lot. Policies often cover mold that results from a covered sudden water loss, sometimes with a dollar cap, and often exclude mold from long-term leaks or humidity. We document the source and extent so you have what you need for a claim. For general guidance, the EPA mold resources are a good read.
Selling a home in Argyle? Buyers’ inspectors often flag attic and crawlspace mold. Addressing it before listing, with a written scope and photos of the finished work, usually causes fewer surprises than negotiating it during the option period.
Why Argyle homeowners choose us for mold
- IICRC S520 methods. Containment, negative air, and HEPA filtration on every job.
- We fix the cause. Drying and moisture control are part of the work, not an add-on.
- Rebuild included. Our team replaces drywall and insulation once the area is clean and dry.
No company can promise mold never returns. Keeping the area dry is what prevents regrowth, and we show you how.
Related services
More help for Argyle properties
Visit our mold remediation service page or the Argyle overview. We also handle mold remediation in Flower Mound, Denton, and Justin.
FAQ
Mold remediation questions
Do I need mold testing before remediation?
Not always. If growth is visible and the source is clear, testing may add cost without changing the plan. Testing helps when mold is suspected but hidden, or when someone in the home has health concerns.
Can I just paint over mold?
No. Paint hides mold for a while, but it keeps growing underneath if the material is still damp. Moldy drywall usually needs to come out.
Is it safe to stay home during remediation?
In most cases, yes. Containment and negative air keep spores inside the work area. People with asthma or weak immune systems may want to stay elsewhere during removal.
How long does mold remediation take?
Small jobs can take 1 to 3 days. Larger areas, attics, or crawlspaces take longer, especially if drying is needed first.
What about mold in my barn or shop?
We can remediate outbuildings too. We focus on the structure and any stored items worth saving, then fix the leak or ventilation issue behind it.