Mold after leaks and floods · Argyle, TX
Mold Removal After Water Damage in Argyle, TX
Mold removal after water damage in Argyle, TX has to deal with the leak and the growth together. We remove the mold, dry what is still wet, and rebuild, so you are not paying twice for the same problem.
- Growth and moisture handled together
- HEPA containment
- Rebuild by our team
- 24/7 line
How fast mold follows water
Mold spores are everywhere in the air. All they need is a damp surface, food like drywall paper or wood, and warm temperatures. After a leak, that can happen fast.
- First 24 hoursWater wicks up drywall and into baseboards and cabinet bases. Fast extraction and drying usually prevent mold entirely.
- 24 to 48 hoursMold can start growing on wet materials. This is the window where drying makes the biggest difference.
- 3 to 7 daysGrowth may become visible, often as spots on the lower wall or a musty smell in a closed room.
- Weeks laterHidden mold spreads inside wall cavities, under flooring, and across attic insulation.
If water got into your Argyle home more than a day or two ago and was not professionally dried, call (940) 274-9880 and we will check for growth.
The source matters
Leaks that lead to mold in Argyle
The type of water event tells us where to look for hidden growth.
Attic equipment in newer homes
Harvest and other newer neighborhoods often have water heaters and air handlers in the attic. An overflowing drain pan wets insulation and ceiling drywall, and mold grows above the ceiling before anyone notices.
Appliance leaks in ArgyleFrozen pipes
Pipes that split during freezes like February 2021 can leak inside walls for days. Wall cavities that never fully dried are a common place for mold months later.
Burst pipe cleanup in ArgyleStorm runoff
Runoff flooding, like the April 2019 storm that pushed water into homes on Skyline Drive, soaks the lower walls. Floodwater carries organic matter, so mold grows faster.
Flood damage in ArgyleHail and roof leaks
Hail like the June 2023 storm can crack shingles without an obvious leak. Slow drips into the attic feed mold on roof decking and insulation.
Storm damage in ArgyleWhat we do
Mold removal after water damage, done in one pass
- Find the wet areas. Moisture meters and thermal imaging show where water still sits, not just where mold is visible.
- Set up containment. Plastic barriers and negative air keep spores out of the rest of the house.
- Remove moldy materials. Drywall, insulation, carpet pad, and trim that grew mold are bagged and removed.
- Clean what stays. Framing and subfloor get HEPA vacuumed, cleaned, and treated with antimicrobial.
- Finish drying. LGR dehumidifiers bring wood and concrete to dry standard before anything is closed up.
- Rebuild. New drywall, paint, and flooring go in once the area checks out.
24/7 Emergency Line
Musty smell after a leak?
Call (940) 274-9880. We check for hidden mold and moisture.
Cost and insurance for mold after a leak
Cost depends on how far the water spread, how long it sat, how much material has mold, and whether the growth is in an attic, crawlspace, or finished room. Catching it early makes the biggest difference. The mold growth risk calculator shows how quickly conditions favor growth.
If the mold came from a sudden, covered water loss, some policies pay for removal, often with a limit. Mold from a long-term leak or humidity is often excluded. Coverage depends on your policy. We document the water source and the mold so your adjuster sees the full story, and we can work directly with your insurance company.
Some people should avoid moldy areas entirely: anyone with asthma, allergies, lung disease, or a weakened immune system, as well as infants. If that describes someone in your home, keep them out of affected rooms until removal and drying are complete, and ask their doctor about any symptoms.
Renting out a casita or selling your home soon? Keep the moisture readings and final photos from the job. Buyers, tenants, and inspectors often ask for proof that past water damage and mold were handled properly, and a clear paper trail answers those questions.
We aim to reach most Argyle homes in about 60 minutes. Our IICRC-certified crews follow S500 for drying and S520 for mold work, and one team handles the rebuild.
Learn more about how Texas heat increases mold growth.
More services
Other Argyle restoration services
See our main mold removal after water damage page or visit the Argyle water damage page. The same service is available in Northlake, Corinth, and Denton.
FAQ
Questions about mold after water damage
The leak was fixed weeks ago. Can there still be mold?
Yes. Fixing the pipe stops new water, but walls, insulation, and subfloor can stay wet for weeks. We test those materials and remove any growth we find.
Do I need both a water company and a mold company?
No. We handle drying and mold removal together, which avoids gaps between two contractors and two sets of paperwork.
Will bleach kill the mold on my drywall?
Bleach may lighten the surface, but it does not reach roots inside porous drywall, and it adds moisture. Moldy drywall is usually cut out.
Why does my room smell musty but I see no mold?
The growth is probably hidden inside a wall, under flooring, or in the attic. Moisture readings and thermal imaging help us find it without tearing out every wall.
Can mold come back after removal?
It can if moisture returns. That is why we find and dry the water source, not just the mold, and point out any conditions that still need attention.